| 
				
					
				 | 
				 | 
				
					 STOLL Q-2B: SHORT DESCRIPTION 
							 
							 
						• Studio monitoring system for the most demanding users. 
						 
						• Preferably for the nearfield in positions away from the wall. 
						 
						• Special construction for the reduction of disturbing enclosure influences regarding diffraction and resonance. 
						 
						• Through filtering of low order the system shows a minimal group delay with corresponding impulse response. 
						 
						• Very modern complement with neodymium-magnets in all transducers allows for compact arrangement for a maximum of homogenity and a minimum of interference. 
						 
						• Magnetically shielded. 
						 
						• Three way system with two 160 mm subwoofers in push-pull arrangement and 54 mm, respectivly 28 mm soft-domes for mid and high frequencies. 
						 
						• Ultra stiff subwoofer enclosure, elastically decoupled mid/treble unit. 
						 
						• Passive filtering technique with high quality components for a reliable operation low on distortion. 
						 
							 
							 
							 STOLL Q-2B: 
						
							TECHNICAL SPECIFICATIONS 
						
						 
							 
							Frequency response: 
						35Hz -6dB, 100Hz20kHz +/- 1,5 dB 
							 
							Dispersion: 
						spheroidal up to approx. 1000Hz, 
						towards higher frequencies evenly increasing directivity. 
							 
							Sensitivity: 
						ca. 85dB / 2.83 V / 1m 
						 
							Power rating: 
						recommended amplifier output 100W to 400W 
						 
							Nominal Impedance: 
						4 Ω 
						 
							Output: 
						100dB longterm, 112dB peak / 1m 
						 
							Dimensions: 
						H/W/D 49/18.5/37 cm, 14.5 kg 
						 
						Alterations of specifications without prior notice 2006. 
						 
						 
						 
							 
						STOLL Q-2B: ARCHITECT SPECIFICATIONS 
							 
						Frequency response: 35Hz -6dB, 100Hz20kHz +/- 1,5 dB. Dispersion: spheroidal up to approx. 1000Hz, towards higher frequencies evenly increasing directivity. Sensitivity: ca. 85dB / 2.83 V / 1m. Power rating: recommended amplifier output 100W to 400W. Nominal Impedance: 4 Ω. Output: 100dB longterm, 112dB peak / 1m. Dimensions: H/W/D 49/18.5/37 cm, 14.5 kg. Alterations of specifications without prior notice 2006. 
							 
							 
						
							
								Download Stoll Q-2b as Pdf. 
							
							
								 
							
						 
				 | 
				 | 
				 |